MFE

Mini Pleat filter elements MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems.

Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.

Large volume flow rates and long filter life due to the very compact, modular structure. Filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.

Low initial differential pressure due to ideal pleat position and largest possible filter area.

Mini Pleat filter elements are available in all commercial sizes, filter classes F9, E11, H13.

The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing.

The special adhesive tape must be ordered separately.

Mini Pleat filter elements used as fine dust filters are certified by Eurovent.

Special characteristics

• Leakage test, standard for all particulate filters of filter class H13

Materials and surfaces

• Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
• Spacers provide a uniform spacing of the pleats
• Joint sealing compound made of permanently elastic two-component polyurethane adhesive
• Frame made of either galvanised sheet steel or aluminium

Construction

• GAL: Frame made of galvanised steel
• AL: Frame made of aluminium

Sizing data

• Filter class
• Volume flow rate [m³/h]
• Initial differential pressure [Pa]
• Nominal size [mm]