XB0_PD_Coverpicture_compositpsd.png
XB0_TVE_MarketingHighlightpsd.png

XB0 for TVE

XB0_img_03psd.png

XB0 for TVR, TVJ, TVT, TZ-Silenzio, TA-Silenzio, TVZ, TVA, TVM

XB0_PD_Coverpicture_compositpsd.png
XB0_TVE_MarketingHighlightpsd.png
XB0_img_03psd.png

XB0

Control components for VAV terminal unit with dynamic transducer

Compact device for use with VAV terminal units

  • Controller, dynamic differential pressure transducer and actuator in one casing
  • Use in ventilation and air conditioning systems, only with clean air
  • Suitable for constant and variable volume flow rates
  • Activation of override controls via external switch contacts
  • Volume flow rates qvmin and qvmax are set in the factory and saved in the controller
  • Change of operating parameters using adjustment devices
  • Service access for manual adjustment devices and PC configuration software
  • Simple terminal connection without the use of additional junction boxes (for types TVE and TVE-Q)

 

General information

Application

  • All-in-one control devices for VAV terminal units

  • Dynamic effective pressure transducer, electronic controller and actuator are fitted together in one casing
  • Dynamic differential pressure transducer for clean air in ventilation and air-conditioning systems
  • Various control options based on setpoint value default setting
  • Volume flow rate control is based on setpoint values received from room temperature controller, central BMS, air quality controller or other devices as an analogue signal.
  • Override controls for activating qvmin, qvmax, shut-off or OPEN position can be set with a switch or relay
  • The actual volume flow rate value is available as a linear voltage signal


If air is contaminated with dust, lint, sticky, moist or slightly aggressive particles:
  • Use Compact controller XS0 or XD0 with static effective pressure transducer instead of the Compact controller XB0 described here
  • XS0 (for TVE and TVE-Q series)
  • XD0 (for TVR, TVJ, TVT, TZ-Silenzio, TA-Silenzio, TVZ, TVA, TVRK)

Control strategy

  • The volume flow controller works dependently of the duct pressure
  • Differential pressure fluctuations do not result in permanent volume flow rate changes
  • To prevent the control from becoming unstable, a dead band is allowed within which the damper blade does not move

  • Flow rate range in the controller set in the factory

    • qvmin: Minimum volume flow rate
    • qvmax: Maximum volume flow rate


  • Operating parameters are specified via the order code and set in the factory


Operating modes

  • Variable or constant value

Variable operation (V)

  • Setpoint value default setting via analogue interface
  • Signal voltage range corresponds to qvmin to qvmax


Constant value mode (F)

  • A setpoint signal is not required, setpoint value corresponds to qvmin


Interface

Analogue interface with adjustable signal voltage range

  • Analogue signal for volume flow rate setpoint value
  • Analogue signal for volume flow rate actual value (factory setting), alternatively: analogue signal for damper blade position (adjustment by others required)


Signal voltage ranges

  • 0 – 10 V DC
  • 2 – 10 V DC


Parts and characteristics

  • Transducer based on dynamic measuring principle. It can 

    only be used with clean air, as a partial volume flow is passed through the transducer
  • Actuators with overload protection
  • Release button to allow for manual operation (only 227V-024-10-DD3)
  • Connecting cable with 4 wires, approx. 0.9 m, halogen-free (only 227V-024-10-DD3)
  • Terminals with cover (only TR0V-024T-05I-DD15)
  • Service interface

 Construction

  • Type 227V-024-10-DD3 for TVR
  • Type 227V-024-10-DD3 for TVJ
  • Type 227V-024-10-DD3 for TVT up to 1000x300 or 800x400
  • Type 227V-024-10-DD3 for TZ-Silenzio, TA-Silenzio
  • Type 227V-024-10-DD3 for TVZ, TVA
  • Type 227V-024-10-DD3 for TVM
  • Type TR0V-024T-05I-DD15 for TVE

Commissioning

  • Due to the volume flow rates set at the factory, always ensure that the terminal units are only installed at the specified locations
  • After successful installation and wiring, the controller is ready for use
  • Operating parameters can be adjusted by the customer (via the adjustment device)


Useful additions

  • Adjustment device GUIV-A (order code AT-VAV-G) for 227V-024-10-DD3
  • Adjustment device GUIV3-M (order code AT-VAV-G3) for TR0V-024T-05I-DD15

Information technique

  • Function
  • SPECIFICATION TEXT
  • ORDER CODE
Principle of operation – TR0V-024T-05I-DD15 (type TVE)
Funktionsprinzip_TVE_fuer_XB0ai.png

① Effective pressure transducer

② Actuator

③ Volume flow controller

④ Setpoint value via analogue signal

⑤ Shaft with effective pressure channel

 

 

 

 

 

 

 

Funktionsprinzip_TVE_fuer_XB0ai.png
Easy_gc_09ai.png

A closed control circuit for regulation of the volume flow rate, i.e. measuring - comparing - adjusting, is characteristic of air terminal units.
The volume flow rate is measured via the differential pressure (effective pressure). This is done via a differential pressure sensor. An integrated differential pressure transducer converts the effective pressure into a voltage signal. The volume flow rate actual value is available as a voltage signal. The factory setting is such that 10 V DC always corresponds to the nominal volume flow rate (qvNom).
The volume flow rate setpoint value is specified by a higher-level controller (e.g. room temperature controller, air quality controller, central BMS). Variable volume flow control results in a value between qvmin and qvmax. It is possible to override the room temperature control, e.g. by a complete shut-off of the duct.
The controller compares the volume flow rate setpoint value to the actual value and controls the integral actuator according to the system deviation.


Category

  • Compact controller for volume flow rate
  • Control of a constant or variable volume flow rate setpoint
  • Electronic controller for connecting a reference value and tapping an actual value
  • The actual value relates to the nominal volume flow rate such that commissioning and subsequent adjustment are simplified
  • Stand-alone operation or integration in central building management system

Application

  • Dynamic transducer for clean air in ventilation and air conditioning systems

Supply voltage

  • 24 V AC/DC


Actuator

  • Integrated; slow running (run time <150 s for 90°)

Installation orientation

  • Either direction

Interface/signalling

  • Analogue signals (0 – 10 V or 2 – 10 V DC)

Connection

  • Terminals with rubber cap cover, no additional terminal box required (control components for TVE)
  • Connecting cable with 4 wires (control components for other types)

Interface information

Analogue:

  • Volume flow rate setpoint and actual volume flow rate value

  • Factory-set actual value: volume flow rate
  • Actual value can be changed to damper position on site

Special functions


  • Activation qvmin, qvmax, closed, open by external switch contacts

Parameter setting

  • Specific parameters for VAV terminal unit are factory-set

  • Operating values: qvmin, qvmax and interface type are factory-set
  • Subsequent adjustment by means of optional tools: Adjustment tool, PC software (each wired)


Factory condition

  • Electronic controller factory mounted on control unit
  • Factory parameter settings
  • Functional test under air; certified with sticker

TVE – D / 200 / D2 / XB0 / V / 0 / qvmin– qvmaxm³/h
|||||||||
12567891011

1 Type
TVE VAV terminal unit 

2 Acoustic cladding
No entry: none
D With acoustic cladding 

3 Material
Galvanised sheet steel (standard construction)
P1 Powder-coated RAL 7001, silver grey
A2 Stainless steel construction 

5 Nominal size [mm]
100, 125 , 160, 200, 250, 315, 400 

6 Accessories
No entry: none
D2 Double lip seal both ends
G2 Matching flanges for both ends 

7 Attachments (control components)
XB0 Compact controller with dynamic transducer 

8 Operating mode
FL Constant value (one setpoint value)
V Variable (setpoint value range) 

9 Signal voltage range
0 0 – 10 V DC
2 2 – 10 V DC 

10 Operating values for factory setting
Volume flow rates in m³/h or l/s
qvconst (only with operating mode F)
qvmin (only with operating mode V)
qvmax (only with operating mode V) 

11 Volume flow rate unit
m³/h
l/s


 

Téléchargements

Information produit

  • Impression du site XB0 - Débit vol.

  • Product data sheet control components XB0

    XB0_PD_2023_08_28_DE_en Product data sheet 860 ko pdf

Certificats

  • Konformitätserklärung / Declaration of conformity XB0-227V-024T-10-DD3

    XB0-227V-024T-10-DD3_CE_01_2020_07_30_de_en_fr Certificate 40 ko pdf
production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Partager la page

Recommander cette page

Vous avez la possibilité de recommander cette page en partageant le lien.

Les champs marqués d'une étoile (*) sont obligatoires.

Contact

Merci pour votre message !

Votre recommandation a été envoyée et sera bientôt reçue par le destinataire.

Contact

Nous sommes à votre disposition

Veuillez spécifier le sujet de votre requête et vos coordonnées.
Tel.: +33 1 56 70 54 54

Pièce jointe (max. 10MB)
Votre message
Votre message à

Les champs marqués d'une étoile (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été reçu par le Centre de Service et est en cours de traitement.
Notre département des demandes de service vous contactera sous peu.
Si vous avez des questions d'ordre général sur nos produits et services, vous pouvez également nous contacter à l'adresse suivante:
Tél .: +49 (0) 2845 2020 | Fax: +49 (0) 2845 202265

Contact

Nous sommes à votre disposition

Veuillez spécifier le sujet de votre requête et vos coordonnées.
Tel.: +33 1 56 70 54 54

Pièce jointe (max. 10MB)
Votre message
Votre message à

Les champs marqués d'une étoile (*) sont obligatoires.

Contact

Merci pour votre message !

Votre message a été reçu par le Centre de Service et est en cours de traitement.
Notre département des demandes de service vous contactera sous peu.
Si vous avez des questions d'ordre général sur nos produits et services, vous pouvez également nous contacter à l'adresse suivante:
Tél .: +49 (0) 2845 2020 | Fax: +49 (0) 2845 202265

TROX Logo
En cliquant sur ce bouton, vous nous autorisez à vous offrir une expérience de navigation et d'achat de qualité sur notre site web. Ces cookies comprennent ceux qui sont nécessaires au fonctionnement du site et au contrôle de nos services et applications, ainsi que ceux qui sont utilisés uniquement à des fins statistiques, pour des paramètres de commodité ou pour afficher un contenu personnalisé. Vous pouvez décider quelles catégories vous souhaitez autoriser et vous pouvez ajuster les paramètres d'utilisation des données en fonction de vos propres besoinsS. Veuillez noter que, selon les paramètres que vous avez sélectionnés, toutes les fonctionnalités de la page peuvent ne pas être disponibles. Vous pouvez modifier votre sélection à tout moment.
Cookies réglages